Front Panel Menus | Parameter Entry and Measurement Setup Dialog Archive |
WCDMA Setup Dialog
The WCDMA Setup dialog allows you to specify the WCDMA settings for your measurement.
Acquisition Config Tab
Input: Narrowband RF Input.
IQ Input Impedance: Select between 50 Ω or 1 MΩ.
Capture Length: Enter the number of frames to capture.
Analysis Start: Enter the number of chips.
Analysis Length: Enter the number of chips.
Spectrum Inversion: Select either Normal or Invert.
RRC Filter: Select the root raised cosine filter On or Off.
Base Station/User Equipment: Uplink or
Downlink.
Figure 4-21. WCDMA Setup Dialog
MS278XB OM |
