Anritsu Series MS278XB operation manual Menu Archive Front Panel Menus Step Size and Offset Menu

Menu Archive Front Panel Menus

Step Size and Offset Menu

The Step Size and Offset Menu lets you set the center frequency step size and frequency offset parameters.

Table 4-4.Step Size and Offset Menu

CF Step Size: To set the center frequency step size, press the CF Step Size button and select the desired step size from the fly-out menu.

To set the span step size manually, select Manual in the fly-out menu, then press in the CF Step Size parameter field and enter a value using the numeric keys. When a new value is entered, the terminator fly-out will appear with the available units. Press on the desired units to terminate the entry.

Range: 1/10 Span, ½ Span, %Span, =Center, =Marker, =Span, Manual

Resolution: 1 Hz (for Manual), 0.01 Hz or 1 Hz (for %Span)

Default: 1/10 Span

Terminators: GHz, MHz, kHz, Hz, Cancel

(Applies only to choices where a numeric value is entered)

Frequency Offset: To set the frequency offset, press in the Frequency Offset parameter field and enter a new value using the numeric keys. When a new value is entered, the terminator fly-out menu will appear with the available units. Press on the desired units to terminate the entry.

Range: –100 GHz to +100 GHz

Resolution: 1 Hz

Default: 0 Hz

Terminators: GHz, MHz, kHz, Hz, Cancel

4-6 MS278XB OM