Instrument Overview | Front Panel Overview |
1.To release the drive tray, insert a 1.0 mm diameter paper clip into the manual release hole as shown in Figure
15 mm
1.0 mm Diameter
Figure 3-5. Manually Ejecting the CD-RW Drive Tray
2.Gently slide the tray open and remove your disk from the drive tray.
3.Remove the paper clip and carefully slide the drive tray completely closed.
If the drive tray does not slide smoothly, or there is excessive resistance, the mechanism may be damaged and in need of service from an authorized Anritsu service center.
MS278XB OM |
