Parameter Entry and Measurement Setup Dialog Archive | Front Panel Menus |
TPC Config Tab
Time Range: Enter the number of frames for the time range.
Averaging Time/Slot: Enter the average time per slot.
TPC Limit Check: Select transmit power control limit check On or Off.
Limits: Sets the TPC limits edge definitions. Refer to Figure
Step Size: Select step sizes of 1, 2 or 3 dB.
Command Pattern: Select the command pattern of
TPC Test Profile: Only Uniform is available at this time.
Custom Profile Name: Not available at this time.
Base Station/User Equipment: Uplink or Downlink.
Figure 4-21. WCDMA Setup Dialog
TPC Limit Edge Definition Dialog
The TPC Limit Edge Definition dialog lets you manually enter the transmit power control limit edge definitions.
For each step size option, both the upper and lower limit can be set for the command patterns of 1, 0, and
Figure 4-22. TPC Limit Edge Definition Dialog
MS278XB OM |
