Preparation for Use

Configuration

If the key is not validated, or there are additional requirements to install the option, you will be notified with a description of the additional requirements in a dialog similar to that shown below:

Figure 2-9.OptionsWiz Dialog

For further assistance with installing options, contact your nearest Anritsu customer service center found in Table 1-4.

Customizing the Tool Bar

Signature’s tool bar can be customized by adding commonly used icons and eliminating those that are seldom used. To customize the tool bar, select Tools Add/Remove Tool Bar Items Customize... from the drop down menu bar. The Customize Toolbar dialog is displayed in Figure 2-33, below:

Figure 2-10.Customize Toolbar Dialog

To add icons to the tool bar, select an icon from the available tool bar buttons and press Add –>. To remove icons from the tool bar, select an icon from the current tool bar buttons and press <– Remove. Additional tool bar configurations include rearranging the icons and resetting the tool bar icon set to default.

MS278XB OM

2-11

Page 35
Image 35
Anritsu Series MS278XB operation manual Customizing the Tool Bar, Customize Toolbar Dialog