Dixon 12881-1104 manual Specifications, SilverTip ZTR 60” & 72”

	SPECIFICATIONS
	SilverTip™ ZTR® 60” & 72”
CHASSIS:	11 GA - rectangular tube, 7 GA reinforcement
SEAT:	Designed for operator comfort with padded back & arm rests. Seat is
	adjustable fore & aft. Mounted on operator suspension system.
MOWER DECK:	2 decks are available. Both decks are made of 10 GA fabricated welded
	construction with 1/4 " reinforcement plate. 3 blades combine for either
	a 60" or 72" cut width. Deep deck with discharge tunnel. Cut height
	approximately 1.5" to 6" via 10 position lift handle.
BLADE DRIVE:	"V" Belt with Electric clutch
DRIVE SYSTEM:	Each rear wheel is independently driven by a Parker pump and wheel
	motor.
ENGINE:	27HP Kohler or Kawasaki Twin, Liquid Cooled 4-Cycle, V-
	Configuration, Overhead Valve, Gasoline, Horizontal Shaft,
	Aluminum Head and Crankcase with Cast Iron Liners, Full
	Pressure Lubrication/Full Flow Filter, Fixed Jet Carburetor,
	Electronic Ignition, In-Line Fuel Filter, Heavy Duty Canister Air
	Cleaner.
STARTING SYSTEM:	Electric by key switch operation with safety interlocks on parking brake,
	blade drive clutch and control levers.
TIRES:	Front 13-6.5x6
	Rear 24-12x12
RECOMMENDED	Front 16-20 lbs.
TIRE PRESSURE:	Rear 8-14 lbs.
CAPACITIES:	Fuel - 11 gallons (approx)
	Hydrostat oil system - 4 quart with in-line 25 micron filter
	Hydrostat oil recommendation - Dixon Blue™ 15W50 Synthetic
	Hydrostatic Fluid
	Engine - 2 quart. SAE 10W30 motor oil
DIMENSIONS:	Width	73.5"(60" Deck), 85.5"(72" Deck)
	Height	54"
	Length	87"
	Weight	1020 lbs.(60" Deck), 1054 lbs.(72" Deck)

Additional information may be provided elsewhere in this manual.

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE

17