Dixon 12881-1104 manual Belts, Belt Tension, Care And Maintenance

CARE AND MAINTENANCE

BELTS:

Check belts every 50 hours. Replace any belts found to be in poor condition.

BELT TENSION:

Mower Deck Serpentine Belt

P/N 9758 (60”) 12033 (72”)

Manual adjustment.

Refer to illustrationfor adjustment procedure.

Idler Weldment		Idler Shock Mount
	“L” Rod	Hex Nut

3/4” (60” & 72” Serpentine)

Tighten or Loosen Hex Nut to achieve this dimension

Engine to Mower Deck Belt

12807 (60” & 72”)

The engine to mower deck drive belts are automatically held in proper tension by springs which push the deck assembly forward and do not require any additional adjustment to be made.

Note: Belt deflection or movement should be approximately 1/4” when measured at mid-point between pulleys. Periodically inspect both belt and idler systems.

37