HP visualize J6000 work stations manual Multiple memory errors detected

Troubleshooting

Identifying LCD-Indicated Conditions

Table 2-1. Chassis Codes for J6000 Workstations

Ostat	Code	FRU	Message	Description
FLT	7845	SYS BD	mem ctlr stat wd	Printing memory controller status word to
				RS-232.
FLT	7846	SYS BD	mem err overflow	Multiple memory errors detected.
FLT	7848	SYS BD	addr not mapped	Memory address outside configured
				memory space.
FLT	785s	DIMM	MBE in DIMM s	Destructive memory test detected an
				uncorrectable memory error in DIMM s.
FLT	786s	DIMM	SBE&MBE DIMM s	Destructive memory test detected both an
				uncorrectable and a correctable memory
				error in DIMM s.
FLT	787s	DIMM	mem err DIMM s	Destructive memory test detected a
				pattern compare error in DIMM s.
FLT	788s	DIMM	SBE in DIMM s	Destructive memory test detected a
				correctable memory error in DIMM s.
FLT	7890	DIMM	MBE overwrt SBE	Firmware replaced a correctable memory
				error entry in the PDT with an
				uncorrectable memory error entry at the
				same address.
FLT	7891	DIMM	dup entry in PDT	The PDT already contains an entry at
				that address.
FLT	7892	SYS BD	PDT write error	Error adding the entry to the PDT.
FLT	7893	SYS BD	PDT is full	The PDT is full--cannot add new entry.
FLT	7900	SYS BD	no DMT entry	Internal error--cannot find DIMM entry.
FLT	7901	SYS BD	no rank entry	Internal error--cannot find rank entry.
FLT	7902	SYS BD	bad refrsh intvl	Computed refresh interval is invalid.
FLT	7903	SYS BD	mem intrlv fail	Cannot generate memory interleave.
FLT	7904	SYS BD	mem reloc failed	Cannot interleave with relocated range
				(3.75GB - 4.0GB).
FLT	7905	SYS BD	mem intrlv error	Undefined memory interleave failure.
FLT	79FF	SYS BD	mem firmware err	Internal error--never expected this to
				happen.
WRN	80F3	SYS BD	err rd IODC byte	Cannot read IODC from ROM or card.
WRN	80F4	EXT IO	boot read error	Cannot load IODC entry_init for boot
				device.
WRN	80F5	EXT IO	boot exec error	Error initializing boot device.

56 Chapter 2