Boot Console Handler
Displaying and Setting the Monitor Type
MONITOR INFORMATION
Path | Slot Head Type | Size | Freq Class |
----
GRAPHICS(1) | 1 | 1 | 1 | 1280x1024 | 75Hz PCI |
GRAPHICS(1) | 1 | 1 | 2 | 1280x1024 | 75Hz PCI, Double buffered |
GRAPHICS(1) | 1 | 1 | 3 | 1280x1024 | 75Hz PCI, Greyscale |
GRAPHICS(1) | 1 | 1 | 4 | 1280x1024 | 75Hz PCI, Double buffered, Greyscale |
GRAPHICS(1) | 1 | 1 | 5 | 1280x768 | 75Hz PCI |
GRAPHICS(1) | 1 | 1 | 6 | 800x600 | 75Hz PCI |
GRAPHICS(1) | 1 | 1 | 7 | 640x480 | 75Hz PCI |
GRAPHICS(1) | 1 | 1 | 8 | 1600x1200 | 75Hz PCI |
GRAPHICS(1) | 1 | 1 | 9 | 1600x1200 | 75Hz PCI, Greyscale |
GRAPHICS(1) | 1 | 1 | 10 | 1200x1600 | 75Hz PCI |
GRAPHICS(1) | 1 | 1 | 11 | 1200x1600 | 75Hz PCI, Greyscale |
GRAPHICS(1) | 1 | 1 | 12 | 1280x1024 | 72Hz |
GRAPHICS(1) | 1 | 1 | 13 | 1280x1024 | 72Hz Double buffered |
GRAPHICS(1) | 1 | 1 | 14 | 640x480 | 60Hz |
GRAPHICS(1) | 1 | 1 | 15 | ||
Configuration Menu: Enter command >
To set the monitor type for GRAPHICS(1) to monitor type 8, type the following:
Configuration Menu: Enter command > monitor graphics(1) 8 [Enter]
This will take effect on the next reboot or reset of the workstation.
MONITOR INFORMATION |
|
|
|
|
| ||
Path | Slot | Head | HPA | Resolution | Freq | Type | Class |
GRAPHICS(1) | 1 | 1 | fffa000000 | 1600x1200 | 75Hz | 8 | PCI |
The new monitor selection will either take effect the next time you reboot the workstation if this is a
Trying to change the monitor type to a number not listed for that graphics device fails and gives you the following warning message:
Value of monitor type n out of range (n - nn)
NOTE Changing the monitor type on an empty slot works; the monitor type will be saved for a future graphics card.
Chapter 4 | 103 |
