System Upgrades
Chapter Overview
Chapter Overview
This chapter contains the following main sections:
•Tools Required
•Exchange and Nonexchange Part Numbers
•System Upgrades
—Electrostatic Discharge (ESD) Precautions
—Prerequisite for the System Upgrade Procedures
—Front Bezel and Top Panel
—Hard Disk Drives
—CD ROM Drive
—Memory DIMMs
—I/O Cards
WARNING For most of the installation and removal procedures in this chapter, you must power off the workstation and unplug the workstation power cord from the AC power outlet. The exceptions to this are the installation and removal of DIMMs and the I/O cards. For these you only need to power off the workstation.
NOTE To maintain FCC/EMI compliance, verify that all covers are replaced and that all screws are properly seated.
Workstation Configurations
Refer to the HP Workstations web site for a complete list of supported accessories, peripherals, and operating system versions for the J6000 workstations. The URL for the web site is:
http://www.hp.com/visualize
76 | Chapter 3 |
