HP visualize J6000 work stations manual Displaying the Status of the I/O Slots

Boot Console Handler

Displaying the Status of the I/O Slots

Displaying the Status of the I/O Slots

The IO command lets you identify all built-in I/O devices and optional I/O devices installed in the option slots. It is available in the Information Menu.

To use the IO command from the Information Menu of the Boot Console Handler, type the following:

Information Menu: Enter command > io [Enter]

Information about the built-in and optional I/O devices is displayed. For example:

I/O MODULE INFORMATION

				IODC	IODC
Path	Decimal	Type	Location HVER SVER Vers Dep
----	-------	----	-------- ---- ---- ---- ---
LAN	10/0/12/0	Ethernet	built-in 0060 a200 0x02 0x00
AUDIO	10/0/13/0	Audio	built-in
IDE	10/0/14/0	IDE	built-in 0060 a300 0x00 0x00
SUPERIO MISC	10/0/14/0	Bridge Device	built-in
SERIAL_1	10/0/14/1/1	RS232 port	built-in 0060 8c00 0x01 0x00
SERIAL_2	10/0/14/1/2	RS232 port	built-in 0060 8c00 0x01 0x00
USB	10/0/14/2	USB	built-in 0060 a900 0x95 0x00
SCSI	10/0/15/0	SCSI	built-in 0060 a300 0x00 0x00
FWSCSI	10/0/15/1	SCSI	built-in 0060 a300 0x00 0x00
GRAPHICS(2)	10/4/2/0	Display	slot 2	0070 8500 0x01	0x00
Main Menu: Enter command		>

108 Chapter 4