HP visualize J6000 work stations manual Displaying the Current Memory Configuration

Boot Console Handler

Displaying the Current Memory Configuration

Displaying the Current Memory Configuration

The following sample screen output uses the memory command to show a memory configuration table with properly-installed and configured memory.

To display the current memory configuration for a workstation, first follow the directions in the section “Accessing the Boot Console Handler” found in this chapter. Once you are in the Boot Console Handler’s Main Menu, type the following:

Main Menu: Enter command > information [Enter]

This places you in the Information Menu. From here, type the following:

Information Menu: Enter command > memory [Enter]

The screen displays status and configuration information for the memory DIMMs installed in the workstation. The following sample shows the memory information when memory DIMMs are properly installed and configured.

MEMORY INFORMATION

MEMORY STATUS TABLE
Slot	Size (A)	Status (A)	Size (B)	Status (B)
----	------	-------------	--------	----------
0a/0b	512MB	Active	512MB	Active
1a/1b	512MB	Active	512MB	Active
2a/2b	512MB	Active	512MB	Active
3a/3b	512MB	Active	512MB	Active
4a/4b	512MB	Active	512MB	Active
5a/5b	512MB	Active	512MB	Active
6a/6b	512MB	Active	512MB	Active
7a/7b	512MB	Active	512MB	Active
TOTAL MEMORY = 8192MB
MEMORY FAULT TABLE
Slot	Size	Status
----	------	-------------

106 Chapter 4