HP visualize J6000 work stations manual Memory ECC test failed to detect

				Troubleshooting
				Identifying LCD-Indicated Conditions
Table 2-1. Chassis Codes for J6000 Workstations
Ostat	Code	FRU	Message	Description
FLT	7611	DIMM	ECC single data	Memory ECC test failed to detect
				single-bit data error.
FLT	7612	DIMM	ECC single ECC	Memory ECC test failed to detect
				single-bit ECC error.
FLT	7613	DIMM	ECC multipl data	Memory ECC test failed to detect
				multiple-bit data error.
FLT	7614	DIMM	ECC multpl signl	Memory ECC test failed to signal
				multiple-bit error.
FLT	7800	SYS BD	mem err summary	Printing memory error summary word to
				RS-232.
FLT	7801	SYS BD	bus ctrl par err	System bus (Runway) control parity error
				detected.
FLT	7802	SYS BD	bus addr par err	System bus (Runway) address parity error
				detected.
FLT	7803	SYS BD	bus data par err	System bus (Runway) data parity error
				detected.
FLT	7804	SYS BD	mem out of range	Memory access outside configured
				memory space.
FLT	7805	SYS BD	bus broadcst err	System bus (Runway) broadcast error
				detected.
FLT	7806	SYS BD	mem addr par err	Memory bus address parity error
				detected.
FLT	7807	SYS BD	mem ctlr stat wd	Printing memory controller status word to
				RS-232.
FLT	781s	DIMM	DIMM s uncor err	Uncorrectable ECC error detected in
				DIMM s.
FLT	782s	DIMM	DIMM s corr err	DIMM s is bad and needs replacing.
FLT	783s	DIMM	Replace DIMM s	Correctable ECC error detected in DIMM
				s.
FLT	7840	SYS BD	unexpected HPMC	Unexpected HPMC detected.
FLT	7841	SYS BD	mem status invld	Memory error status word is invalid.
FLT	7842	SYS BD	mem summ invalid	Memory summary word is invalid.
FLT	7843	SYS BD	fwd prog invalid	Memory forward progress word is invalid.
FLT	7844	SYS BD	mem HPMC summ wd	Printing memory error summary word to
				RS-232.

Chapter 2 55