HP visualize J6000 work stations Resetting the Workstation, Then type the following at the prompt

Boot Console Handler

Resetting the Workstation

Resetting the Workstation

To reset the workstation to its predefined values, follow the directions in the section “Accessing the Boot Console Handler” found in this chapter, and type the following at the prompt to access the Configuration Menu:

Main Menu: Enter command > co [Enter]

When the Configuration Menu appears, type the following at the prompt:

Configuration Menu: Enter command > default [Enter]

Then type the following at the prompt:

Configuration Menu: Enter command > reset [Enter]

98 Chapter 4