EuroLite Cases EDX-4, 4-channel DMX dimmer pack Technical Specifications, Replacing the fuse

We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use alcohol or solvents!

There are no servicable parts inside the device except for the fuse. Maintenance and service operations are only to be carried out by authorized dealers.

7.1 Replacing the fuse

If the fine-wire fuse of the device fuses, only replace the fuse by a fuse of same type and rating.

Before replacing the fuse, unplug mains lead.

Procedure:

Step 1: Open the fuseholder on the toppanel with a fitting screwdriver.

Step 2: Remove the old fuse from the fuseholder.

Step 3: Install the new fuse in the fuseholder.

Step 4: Replace the fuseholder in the housing.

Should you need any spare parts, please use genuine parts.

If the power supply cable of this device becomes damaged, it has to be replaced by a special power supply cable available at your dealer.

Should you have further questions, please contact your dealer.

8. TECHNICAL SPECIFICATIONS

Power supply:	230 V AC, 50 Hz ~
Max. power output:	3680 W
Max. total current:	16 A
Number of channels:	4
Resistive load/channel:	1150 W
Max. current/channel:	5 A
Output sockets:	4 safety power outlets
DMX-output:	3-pin XLR-mounting-plug
DMX-input:	3-pin XLR-mounting-jack
Dimensions:	320 x 165 x 110 mm
Weight:	3 kg

Please note: Every information is subject to change without prior notice. 30.03.2006 ©

22/40 70064072_V_2_2.DOC