Philips DVP3111/12 user manual Audio setup, 12 EN

1Press SETUP.

» [General Setup] menu is displayed.

2Press .

3Select an option, then press OK.

4Select a setting, then press OK.

•To return to the previous menu, press .

•To exit the menu, press SETUP.

[Disc Lock]

Set play restriction for a disc which is loaded in the disc compartment (maximum 20 discs can be locked).

•[Lock] - Restrict access to the current disc. The next time you want to play this disc or unlock it, you need to enter the password.

•[Unlock] - Play all discs.

Tip

•You can set or change the password, go to [Preferences] > [Password].

[OSD Language]

Select an on-screen menu language.

[Sleep Timer]

Switch automatically to standby at the preset time.

•[Off] - Disable sleep mode.

•[15 mins], [30 mins], [45 mins], [60 mins] -Select the count down time for this product to switch to standby.

[Auto Standby]

Turn on or off automatically standby.

•[On] - Switch to standby 15 minutes of inactivity (for example, in pause or stop mode).

•[Off] - Disable the auto standby mode.

[DivX(R) VOD Code]

Display the DivX® registration code.

Tip

•Use this player’s DivX registration code when you rent or purchase video from www.divx.com/vod. The DivX videos rented or purchased through the DivX® VOD (Video On Demand) service can be played only on the device to which it is registered.

Audio setup

1Press SETUP.

» [General Setup] menu is displayed.

2Press to select [Audio Setup], then press .

3Select an option, then press OK.

4Select a setting, then press OK.

•To return to the previous menu, press .

•To exit the menu, press SETUP.

[Analogue Output]

Select an analogue setting based on the audio device that is connected through the analogue audio jack.

•[Stereo] - For stereo output.

•[LT/RT] - For surround sound output through two speakers.

[Digital Audio]

Select a digital setting based on the digital amplifi er/ receiver that is connected through the digital jack (coaxial/digital).

•[Digital Output] - Select a type of digital output.

•[Off] - Disable digital output.

•[All] - Support multi-channel audio formats.

•[PCM Only] - Downmix to two-channel audio format.

•[LPCM Output] - Select the LPCM (Linear Pulse Code Modulation) output sampling rate.

•[48kHz] - For discs recorded at sampling rate of 48 kHz.

•[96kHz] - For discs recorded at sampling rate of 96 kHz.

Note

•[LPCM Output] setting is only available if the [Digital Output] is set to [PCM Only].

•The higher the sampling rate, the better the sound quality.

12EN