1 Connect the AC power cable to the wall |
socket. |
» |
General Setup
The player is ready to be set up for use. |
4 Get started
Prepare the remote control
Disc Lock
OSD Language
Sleep Timer
Auto Standby
DivX(R) VOD Code
English |
Melayu |
1Open the battery compartment.
2Insert two R03 or AAA batteries with correct polarity
3Close the battery compartment.
Caution
•Remove batteries if they are exhausted or if the remote control is not to be used for a long time.
•Do not mix batteries (old and new or carbon and alkaline, etc.).
•Batteries contain chemical substances, so they should be disposed of properly.
Find the correct viewing channel
1Press 
to turn on this product.
2Turn on the TV and switch to the correct
Select menu display language
1Press SETUP.
» [General Setup] menu is displayed.
2Select [OSD Language], then press
.
•The language options may vary from different regions.
3Press 
to select a language, then press OK.
5 Play
Play a disc
Caution
•Do not place any objects other than discs into the disc compartment.
•Do not touch the disc optical lens inside the disc compartment.
1Press 
to open the disc compartment.
2Insert a disc with its label facing up.
3Press 
to close the disc compartment and start disc play.
•To view disc play, turn on the TV to the correct viewing channel for this product.
•To stop disc play, press 
.
Note
•Check the types of discs supported (see “Specifi cations” > “Play media”).
•If the password entry menu is displayed, enter the password before you can play the locked or restricted disc (see “Adjust settings” > “Preferences” > [Parental Control]).
•If you pause or stop a disc, the screen saver appears after 5 minutes of inactivity. To deactivate the screen saver, press DISC MENU.
•After you pause or stop a disc and no button is pressed within 15 minutes, this product automatically switches to standby.
8EN
