Mounting
Orientation
The Satellite™
Rigging
Be sure that the structure can support the weight of the fixture. Please see the “Technical Specifications” section of this manual for a detailed weight listing. Mount the fixture securely. This may be done with a screw, nut and bolt, or a hanging clamp. The hole in each mounting bracket is 13
mmin size. When rigging, consider routine maintenance and control panel access. Please see the following steps for installation.
Due to the internal battery in the product, this product may not be operated in a position other than upright.
Safety cables must always be used.
2 clamps, one on either mounting bracket, must be used if operating this fixture is any position other than floor standing.
Fixture Mounting
Location
Mounting
Brackets (2)
3. Setup | 9 | 12/28/2009 12:38 PM |