Kathrein UFS 700si, UFS 700sw manual First Installation General

FIRST INSTALLATION: General

Before using your unit for the first time, read the “Safety Instructions” and “Connection and Setup” sections.

The “Connection examples” section provides a sample configuration.

Do not connect the unit to the power supply until all installation work has been properly carried out.

The guidance given in the “First Installation” section assumes that the receiver has been properly connected, as per the “Safety Instructions” and “Connection and Set-Up” sections.

First switch your TV set on and select the AV channel slot. Switch on your receiver at the power switch at the front of the unit. The following display appears:

Also pay attention to the bars at the bottom of the on- screen display! These provide information on what to do next.

Select the menu language you want using the  buttons. Available options: German, English, French, Italian, Spanish, Czech, Dutch and Turkish.

Press the ! (green) button to move to the next menu.

Note: If you are unsure whether you chose the right option from a previous menu, you can go

back a step at any time during the First Installation process by pressing the (red) button.

The following display appears:

13