Kathrein UFS 700sw, UFS 700si manual First Installation Single-cable system Manual

FIRST INSTALLATION: Single-cable system (Manual)

Test connection

When you have completed all the settings, press the  buttons to switch to the “Test connection”

selection field and press the  button. The receiver now tests whether a connection to the single-cable system can be established or not. As soon as the receiver has established a connection to the single-cable system, you will see the following display:

Press the  button to acknowledge this display. Then press the  button. You will be asked whether

you wish to save the changes. Use the  buttons to select “Yes, save changes” and confirm by pressing

the  button. Now press the ! (green) button.

The receiver will automatically display the selection menu for the channel search. Continue by selecting the item (Execute Channel search).

If no connection to the single-cable system could be established, the following display appears:

Check your settings (frequency and transmission channel) and if necessary call for expert help.

24