FIRST INSTALLATION: SIMPLE LNB
If you choose not to use a universal LNB, you must here set the frequency ranges for which your LNB was configured.
Use the buttons to select the frequency range to be changed (low, high or limit frequency).
Use the buttons or the digital input buttons to set the exact frequency for which your LNB was configured.
Test transponder
To check whether the settings that you have made are correct, use the buttons to move to the “Test transponder” field.
Use the buttons to select the required transponder from the various ones listed. If your settings are correct, you will see at the top right of the screen the live signal of a channel for the currently selected transponder.
If you are not receiving a signal, check your settings again and if necessary call for expert help.
When you have finished configuring the satellite, press the !(green) button. The receiver then automatically calls up the selection menu for the channel search. Continue by selecting the item (Execute Channel search).
19