Kathrein UFS 710sw, UFS 710si FIRST INSTALLATION Single-cable system Manual, Selection “EXU 908”

FIRST INSTALLATION: Single-cable system (Manual)

Selection “EXU 908”

When the “EXU 908” single-cable matrix is being used, it is essential that the LNB is set to “Universal”!

Transmission channel

Use the  buttons to select a free available transmission channel. A maximum of eight transmission channels are available (1284, 1400, 1516, 1632, 1748, 1864, 1980 and 2096 MHz).

Secure channel with PIN

The EXU 908 single-cable matrix allows the transmission frequency to be protected by inputting a PIN. No other receiver can then use that transmission frequency unless the PIN is input.

Use the  buttons to select the setting “Yes”. A line with the text “Password PIN” is then displayed. Press the  buttons to select this line. You can now use the numeric pad to input a PIN (0-255).

Test connection

When you have set a free transmission channel, press the  buttons to switch to the “Test connection”

selection field and press the  button. The receiver now tests whether a connection to the single-cable system can be established or not. As soon as the receiver has established a connection to the single-cable system, you will see the following display:

Press the  button to acknowledge this display. Then press the  button. You will be asked whether

you wish to save the changes. Use the  buttons to select “Yes, save changes” and confirm by pressing

the  button. Now press the ! (green) button.

The receiver will automatically display the selection menu for the channel search. Continue by selecting the item (Execute Channel search).

If no connection to the single-cable system could be established, you will receive the message “Registration was abortive!”.

Check your settings and if necessary call for expert help.

27