Kathrein UFS 640si manual Connection and SET-UP, Connecting the Unit SAT-IF Connections

Page 9

CONNECTION AND SET-UP

The following section is intended specifically for specialist dealers. You need not refer to this section unless you are carrying out the installation yourself.

The “Connection examples” section provides a sample configuration.

Do not connect the receiver to the power supply until all installation work has been properly carried out. Refer to the information in the “Safety instructions” section.

CONNECTING THE UNIT (SAT-IF CONNECTIONS)

Connect the Sat IF input on the receiver to the satellite reception system. Use a coaxial cable with a standard F connector.

If the F standard connectors are not yet fitted on the cables, strip the insulation from the cables as shown in the following illustration and carefully screw the F standard connectors on to the ends of the cables until they are securely seated.

When fitting the connector, make sure that no wires from the braid are touching the inner conductor, so no short circuit can occur.

The quality of the reception signal depends on this connection.

RECEPTION REQUIREMENTS

Make sure that your own satellite antenna system is equipped at least with a universal LNB for digital reception in the high-band range.

RECEPTION SYSTEM PRESETS

The presets for the control signals have been made for standard reception systems, i.e. 14/18 V for polarity reversal and 22 kHz switching signal for low/high band changeover on multi-feed reception systems.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents UFS 640si Preface Information on Audio Mpeg INC. and S.I.SV.EL, S.P.A Important InformationDisposal Instructions Spent batteries are special wasteContents Remove from the Favourites List Safety Instructions Important Notes Delivery Scope Receiver Features / Delivery ScopeCONTROLS, Displays and Connections View of Front Panel Flap RemovedView of Rear Panel Reception System Presets Connecting the Unit SAT-IF ConnectionsConnection and SET-UP Reception RequirementsTV and Video Recorder Connection Inserting Batteries Into the Remote ControlAudio Connection Electrical Digital OutputMounting on a Fixed Even Surface UNDER-SHELF Mounting$ PIP green Remote ControlFirst Installation General Select the TVs picture format. Either 43 or Picture format TV-Scart-OutputHdmi format Number of Satellites First Installation DiSEqC1.0LNB settings Satellite and PositionTest transponder LNB voltage First Installation Simple LNBConfigure satellites First Installation One CableFirst Installation One Cable First Installation Single-cable system automatic First Installation single-cable system manual Connected equipmentSelection user-defined First Installation single-cable system manual First Installation single-cable system manual First Installation single-cable system manual First Installation single-cable system manual Channel Search Mode First Installation Channel searchPerform a Channel search Network SearchLocal time offset First Installation Channel Search/Date and timeMenu Concept Operating InstructionsMenu Tree Main MenuAlphanumeric Inputs Language Setting OSDChannel Messages ON-SCREEN Displays OSDChannel Information Calling UP the Options ChannelError Signalling Option SelectionChannel List TV/RADIO Search function Selection and sorting optionsCalling UP the EPG EPG Electronic Programme GuideSelection options Current ViewPreview View Programme Listings Additional Information i Button Recording Timer If the programme is present in the EPGProgramme not present in the EPG Record Daily Record OnceRecord Weekly Plan Recording Videotext Teletext Selection of the List / Channels to be Edited Edit Channel ListEditing Lists / Channels Move Channels Last Function MemoryDelete Channels Skip ChannelsLock Channels Copy Channels to the Favourites ListStart Blockselection Highlighting Several Channels Remove from the Favourites List Edit Favourites ListsRemove from favorites list LlockRename Favourites List Automatic Channel Search Search Channels Channel SearchSatellite Manual Channel Search Transponder frequency Channel Search with Service ID Service ID Parental Control Locking Main MenuLock SET-TOP-BOX Define NEW PIN Code Settings TV Settings TV, Picture and Sound Customize Screen Menu Adjust Menu on TVFunctional Range Channel OSD DurationDate and Time Antenna ConfigurationCommon Interface Automatic clock changeUpdating Software Service MenuChannel list Updating softwareRestore Factory Settings Connecting UP the VIDEO/DVR RecordingPlayback Backup Operation Using the Front PANEL/SERVICEService ButtonTechnical Appendix FeaturesType UFS 640si Scart Socket Assignment VHS/S-VHS SwitchingConnection Example EXR 501/551/552 UAS EXU Short Technical Guide PID Symbol RateTransponder VIDEO-BIT-RATEGlossary Troubleshooting Problem Cause RemedyFor Your Notes For Your Notes 936.3469/A/1108/ZWT Technical data subject to change

UFS 640si specifications

The Kathrein UFS 640si is a sophisticated satellite receiver that has earned a reputation for its reliability and advanced features, catering to avid television viewers and technology enthusiasts alike. This model, designed for the reception of digital satellite television, promises high-quality performance and a user-friendly experience.

One of the standout features of the UFS 640si is its support for high definition (HD) broadcasting. The receiver can display crystal-clear, sharp images, providing viewers with an immersive visual experience. With its ability to decode multiple formats, including MPEG-2 and MPEG-4, the UFS 640si ensures compatibility with a wide range of satellite channels, allowing users to enjoy an extensive selection of programming.

The receiver is equipped with a powerful dual-core processor, which significantly enhances its performance and responsiveness. This processing capability enables quick channel switching, seamless menu navigation, and efficient handling of multiple tasks simultaneously, making the overall user experience smooth and enjoyable.

Connectivity is another key strength of the Kathrein UFS 640si. The device comes standard with an HDMI output, ensuring high-quality audio and video transmission to modern televisions. Additionally, it features USB ports for external storage devices, enabling users to record their favorite shows and pause live television, a feature that adds convenience to the viewing experience. The receiver also supports various multimedia formats, allowing playback of videos, images, and music directly from USB-connected devices.

Furthermore, the UFS 640si includes networking capabilities, allowing for easy integration into home networks. Users can access online services and additional content through its Ethernet port, expanding entertainment options beyond traditional broadcasting.

The user interface of the Kathrein UFS 640si is intuitive and easy to navigate, making it accessible for both tech-savvy users and those new to satellite receivers. The system includes programmable electronic program guides (EPG) that help viewers keep track of upcoming shows and plan their viewing schedule effectively.

In conclusion, the Kathrein UFS 640si satellite receiver stands out due to its comprehensive features, robust performance, and user-friendly design, making it an ideal choice for anyone looking to enhance their television viewing experience.
Top Page Image Contents