Kathrein UFS 640si manual Satellite and Position, LNB settings, Test transponder

Page 17

FIRST INSTALLATION: DiSEqC™1.0

The following display appears (example):

Satellite and Position

Use the buttons to set the desired satellite (selection from 17 pre-programmed options).

LNB settings

Use the buttons here to select the LNB type used in your system. The choice is between “Universal” and “user-defined”.

Universal:

No further input is required, since all necessary frequency ranges are covered by a universal LNB.

User-defined:

If you choose not to use a universal LNB, you must here set the frequency ranges for which your LNB was configured.

Use the buttons to select the frequency range to be changed (low / high frequency).

Use the buttons or the keypad to set the exact frequency for which your LNB was configured.

Test transponder

To check whether the settings that you have made are correct, use the buttons to move to the “Test

transponder” field. Use the buttons to select the required transponder from the various ones listed. If your settings are correct, you will see at the top right of the screen the live signal of a channel for the currently selected transponder.

If you do not receive a signal, check your settings again and if necessary call for expert help.

You have now completed all settings for the first satellite. Press the button to return

to the “Satellite Selection Menu” and perform the settings in the same way for the remaining satellites. When you have finished configuring the satellite press PIP (green). The receiver then automatically calls up the selection menu for the channel search. Continue by selecting the item (“Perform channel search”).

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents UFS 640si Preface Information on Audio Mpeg INC. and S.I.SV.EL, S.P.A Important InformationDisposal Instructions Spent batteries are special wasteContents Remove from the Favourites List Safety Instructions Important Notes Delivery Scope Receiver Features / Delivery ScopeView of Rear Panel CONTROLS, Displays and ConnectionsView of Front Panel Flap Removed Reception System Presets Connecting the Unit SAT-IF ConnectionsConnection and SET-UP Reception RequirementsTV and Video Recorder Connection Inserting Batteries Into the Remote ControlAudio Connection Electrical Digital OutputMounting on a Fixed Even Surface UNDER-SHELF Mounting$ PIP green Remote ControlFirst Installation General Select the TVs picture format. Either 43 or Hdmi format Picture formatTV-Scart-Output Number of Satellites First Installation DiSEqC1.0Test transponder LNB settingsSatellite and Position LNB voltage First Installation Simple LNBConfigure satellites First Installation One CableFirst Installation One Cable First Installation Single-cable system automatic Selection user-defined First Installation single-cable system manualConnected equipment First Installation single-cable system manual First Installation single-cable system manual First Installation single-cable system manual First Installation single-cable system manual Channel Search Mode First Installation Channel searchPerform a Channel search Network SearchLocal time offset First Installation Channel Search/Date and timeMenu Concept Operating InstructionsMenu Tree Main MenuAlphanumeric Inputs Language Setting OSDChannel Messages ON-SCREEN Displays OSDChannel Information Calling UP the Options ChannelChannel List TV/RADIO Error SignallingOption Selection Search function Selection and sorting optionsCalling UP the EPG EPG Electronic Programme GuideSelection options Current ViewPreview View Programme Listings Additional Information i Button Programme not present in the EPG Recording TimerIf the programme is present in the EPG Record Daily Record OnceRecord Weekly Plan Recording Videotext Teletext Selection of the List / Channels to be Edited Edit Channel ListEditing Lists / Channels Move Channels Last Function MemoryDelete Channels Skip ChannelsStart Blockselection Highlighting Several Channels Lock ChannelsCopy Channels to the Favourites List Remove from the Favourites List Edit Favourites ListsRemove from favorites list LlockRename Favourites List Automatic Channel Search Search Channels Channel SearchSatellite Manual Channel Search Transponder frequency Channel Search with Service ID Service ID Lock SET-TOP-BOX Parental ControlLocking Main Menu Define NEW PIN Code Settings TV Settings TV, Picture and Sound Customize Screen Menu Adjust Menu on TVFunctional Range Channel OSD DurationDate and Time Antenna ConfigurationCommon Interface Automatic clock changeUpdating Software Service MenuChannel list Updating softwareRestore Factory Settings Playback Connecting UP the VIDEO/DVRRecording Backup Operation Using the Front PANEL/SERVICEService ButtonTechnical Appendix FeaturesType UFS 640si Scart Socket Assignment VHS/S-VHS SwitchingConnection Example EXR 501/551/552 UAS EXU Short Technical Guide PID Symbol RateTransponder VIDEO-BIT-RATEGlossary Troubleshooting Problem Cause RemedyFor Your Notes For Your Notes 936.3469/A/1108/ZWT Technical data subject to change

UFS 640si specifications

The Kathrein UFS 640si is a sophisticated satellite receiver that has earned a reputation for its reliability and advanced features, catering to avid television viewers and technology enthusiasts alike. This model, designed for the reception of digital satellite television, promises high-quality performance and a user-friendly experience.

One of the standout features of the UFS 640si is its support for high definition (HD) broadcasting. The receiver can display crystal-clear, sharp images, providing viewers with an immersive visual experience. With its ability to decode multiple formats, including MPEG-2 and MPEG-4, the UFS 640si ensures compatibility with a wide range of satellite channels, allowing users to enjoy an extensive selection of programming.

The receiver is equipped with a powerful dual-core processor, which significantly enhances its performance and responsiveness. This processing capability enables quick channel switching, seamless menu navigation, and efficient handling of multiple tasks simultaneously, making the overall user experience smooth and enjoyable.

Connectivity is another key strength of the Kathrein UFS 640si. The device comes standard with an HDMI output, ensuring high-quality audio and video transmission to modern televisions. Additionally, it features USB ports for external storage devices, enabling users to record their favorite shows and pause live television, a feature that adds convenience to the viewing experience. The receiver also supports various multimedia formats, allowing playback of videos, images, and music directly from USB-connected devices.

Furthermore, the UFS 640si includes networking capabilities, allowing for easy integration into home networks. Users can access online services and additional content through its Ethernet port, expanding entertainment options beyond traditional broadcasting.

The user interface of the Kathrein UFS 640si is intuitive and easy to navigate, making it accessible for both tech-savvy users and those new to satellite receivers. The system includes programmable electronic program guides (EPG) that help viewers keep track of upcoming shows and plan their viewing schedule effectively.

In conclusion, the Kathrein UFS 640si satellite receiver stands out due to its comprehensive features, robust performance, and user-friendly design, making it an ideal choice for anyone looking to enhance their television viewing experience.
Top Page Image Contents