Installing the indoor diplexers

1.Disconnect the satellite cable from the “SAT IN” terminal on your satellite receiver. See Fig 19 .

Fig 19.

2.Connect the satellite cable to the terminal marked “TV/SAT” on the indoor diplexer. See Fig 20 .

3.Connect one of the supplied white 12” connector cables from the terminal labeled “SAT” on the inside diplexer to your satellite receiver’s “SAT IN” terminal. See Fig 20.

4.Connect the other white 12” connector cable from the terminal labeled “TV” on the inside diplexer to your satellite receiver’s “ANT IN” terminal. See Fig 20.

5.Connect a coaxial cable (not supplied) from the satellite receiver’s “TV OUT” terminal to your television or VCR. See Fig 20.

6.Repeat step for each satellite receiver.

7.Continue to “Setting up your TV”.

Diplexer

Fig 20.