TERK Technologies TV44 manual Continue to Installing the Indoor Diplexers

Page 9

4.Slide 4 black 32” antenna cables up through the satellite arm and connect to the LNB. See Fig 12.

5.Reconnect the LNB to the dish arm. See Fig 12.

Fig 12.

6.Connect the remaining end of the 4 black 32” antenna cables to the IN 1, IN 2, IN 3 and IN 4 terminals on the TV44 antenna. See Fig 13.

Logo Side

Dish Side

Fig 13.

8

7. Continue to “Installing the Indoor Diplexers.”

Image 9
Contents TV44 Safety Precautions Important Safety PrecautionsLightning protection How to install your new TV44 antenna For best reception resultsBefore you begin Installing the TV44 on a satellite dish Page Connecting the TV44 Continue to Installing the Indoor Diplexers Triple LNB Phase3 Satellite Dish Continue to Installing the Indoor Diplexers Phase 2 Satellite Dish Using a Multiswitch with an Antenna Input If the supplied black 32 antenna cables are not long enough With Dish 500 Using SW21 SwitchesInstalling the indoor diplexers Limited Warranty Setting up your TV