Connecting the TV44
Depending on the type of satellite dish you have, go to one of the following five scenarios to determine how to connect the TV44 antenna to your satellite dish.
1.Remove the LNB from the arm of the satellite dish to expose the satellite cables. See Fig 6.
Fig 6.
2.Disconnect the satellite cable(s) from the satellite dish’s LNB and pull them out through the bottom of the satellite dish arm. See Fig 6.
3.Connect the satellite cables to the terminals marked OUT 1 and OUT 2 on the TV44 antenna. See Fig 7.
Logo Side
Fig 7. |
| Dish Side |
|
|
|
5