Shure AXS31, AXS58 setup guide Transmitter Features, AXB1/AXB1G, Bodypack

Page 2

English

TRANSMITTER FEATURES

1

2

4 5

6

10

11

7

8

9

9

AXB1/AXB1G

Bodypack

AXB1G

FIGURE 2. AXB1, AXB1G, AND AXB11 BODYPACK TRANSMITTER FEATURES

1.Battery Compartment. Holds one 9V alkaline battery.

2.Antenna. For best operation, the antenna must hang verti- cally, and should not be coiled or bundled.

3.Belt Clip. Secures the transmitter to a belt, waistband or gui- tar strap.

4.Power On Indicator. Glows green when transmitter is pow- ered on.

5.Power Switch. Recessed to prevent accidental turn-off.

operating time remains and transmitter battery should be changed.

8.Audio Gain Control. Provides audio level adjustment to ac- commodate different sound sources (e.g., speaking or play- ing an instrument). A small screwdriver is supplied to make adjustments.

9.Input Connector. AXB1: Tini Q-G￿connector provides connection to a variety of lavalier and headset microphone cables and to the Shure WA302 instrument adapter cable. AXB1G: Accepts a standard 1/4 inch or guitar cable plug.

6.Mute Switch. Slide to ON for normal operation. Slide to MUTE to prevent sounds from being transmitted to the re- ceiver. Muting the transmitter does not turn off transmitter power.

7.Low Battery Indicator. Glows red when one hour or less of

1 2 3

4

10.Lavalier Microphone. WL93 omnidirectional condenser microphone supplied with a mount that clips onto a tie, lapel, or acoustic instrument.

11.Cables. AXB1G: 1/4 inch to 1/4 inch guitar cable for electric guitar or other electric instruments.

5

6

7

FIGURE 3. AXH2 MICROPHONE-TRANSMITTER FEATURES

1.Power Switch. Recessed to prevent accidental turn-off.

2.Power On Indicator. Glows green when power is on.

3.Low Battery Indicator. Glows red when one hour or less of operating time remains and battery should be changed.

4.Mute Switch. Slide to ON for normal operation. Slide to MUTE to prevent sounds from being transmitted to the re- ceiver. Muting the transmitter does not turn off power.

5.Audio Gain Control. Allows you to adjust the transmitter to match the loudness of your vocals. A small screwdriver is supplied to make adjustments.

6.9V Alkaline Battery (shown installed). Provides power to the microphone-transmitter.

7.Battery Cover. Unscrews for access to the 9V alkaline bat- tery and gain control.

2

Image 2
Contents System Receiver FeaturesAXR3 AXR4N Bodypack Transmitter FeaturesAXB1/AXB1G AXB1GReceiver Setup System SetupBattery Installation Headset AssemblyOperating Your Wireless System Wireless SystemEstablishing a Wireless Link AXR3 AXR4NWireless System Adjustments Solutions TroubleshootingIndicator Status Problem Distortion, or other radioAXR3 and AXR4N Receiver Specifications System and Component SpecificationsAXB1, AXB1G Bodypack Transmitter Specifications AXH2 HAND-HELD Transmitter SPECIFICA- TionsACCESSORIES, Licensing and Warranty