Channel set-up
INSTALLATION
Return
Manual installation
Auto installation
Organizer
MANUAL INSTALLATION
EN |
| Return |
|
|
|
|
12 |
|
|
|
|
| |
| Standard | EURO | ||||
|
| Frequency | 150.75 MHz | |||
|
| Name | BBC2 | |||
|
|
|
|
|
| |
|
|
|
|
|
| |
|
| Store on PR: | 02 |
|
| |
|
| Decoder | ||||
|
| Text | 1 |
|
| |
Manual installation
You may want to to carry out a manual installation in case some channels have not been stored during the initial
The information displayed pertains to the current channel.The Standard line is highlighted.
To search for channels, do the following:
1. On the Standard line, select the standard for your country.
The following standards are available: FR for France and Luxemburg, UK for United Kingdom and Eire, DK for Eastern Europe and the Middle East, and EURO for Western Europe.
2.Select the Frequency line, enter a frequency or use the 
buttons to start a search.The available frequencies depend on the selected standard.
3.Once a channel is found, if it is recognised, its name is automatically detected and displayed on the Name line.
Note:This line is only informative and cannot be selected.
4.You can tune the channel manually using the
5.If the channel is encoded and you want to connect a decoder to an AV socket, select the Decoder line and check the box using the 
buttons.
6.Select the Text line, and using the and buttons, select the character set to be used for Teletext:
1:Western Europe
2:Eastern Europe
3:Russian, Bulgarian
4:Greek
5:Arabic
6:Ukrainian
7:Byelorussian
Note:The Teletext character set is stored per channel.
You can now store the settings for this channel.To do so, select the Store on PR: line, enter the number you want to assign to the channel (e.g. 02 for BBC2), press OK to confirm.
Press EXIT to close the menu.
Note:The INSTALLATION menu is only available in video mode (TV channels or AV programmes).