Technicolor - Thomson 42PB120S4 manual Important safety instructions

Page 2

42pb120S4-en 2/07/04 11:32 Page 2

Important safety instructions

Warnings and precautions

EN

2

Ensure that your domestic mains supply voltage matches the voltage indicated on the identification label located at the back of the set.

The TV set’s components are sensitive to heat.The maximum ambient temperature should not exceed 35° Celsius.

Do not cover the vents at the back of the TV set. Leave sufficient space around it to allow adequate ventilation.

Install the TV set away from any source of dust or heat (radiator, etc.). Do not expose it to direct sunlight.

Moisture in rooms where the set is installed should not exceed 85% humidity. If you have to use the TV set outdoors, do not expose it to rain or splashing water.

Moving the set from a cold place to a warm one can cause condensation on the screen (and on some inside components). Let the condensation evaporate before switching the TV set on again.

During thunderstorms, we recommend that you disconnect the set from the mains and aerial so that it is not affected by electrical or electromagnetic surges that could damage it. For this reason, keep the mains and aerial sockets accessible so they can be disconnected if needed.

Unplug the set immediately if you notice it giving off a smell of burning or smoke.You must never, under any circumstances, open the set yourself, as you risk an electric shock in doing so.

If you intend to be away for a long period, switch the set off at the on/off switch located on the rear panel (see the figure below).

Even when off, some components remain in contact with the mains electricity supply.To completely isolate the set you must remove the plug from the mains supply socket.

This product is fitted with a 3-pin grounded plug, which will only fit into a grounded power outlet.This is a safety feature. Do not alter the plug, as this would defeat the safety feature.

Avoid any intrusion of liquid or small metallic objects inside the set. If such an incident were to occur, immediately disconnect the TV set from the mains supply and refer servicing to qualified service personnel.

Use the screen saver when using a computer.

Switch the TV set to standby mode when you do not use it.

The top of the TV set is usually very hot due to the high temperature of exhaust air released through the ventilation openings. Do not place your hands or face close to these openings to avoid burns or personal injuries. Do not place any object close to the ventilation openings to avoid any damage to the object or to the TV set itself.

Make sure that all cables are disconnected before moving the TV set, to avoid damaging the cables and thus cause fire or electric shock danger.

100 ~ 240 V

50/60 Hz

main power

switch

Image 2
Contents Table of contents Important safety instructions Trademarks InstallationCare and maintenance Compliance with CE standardsPackage contents Understanding your set Front panelRemote control AMPUsing the remote control for other equipment Video recorder DVD player Satellite receiver Hi-fi systemManual programming Programming the remote controlAutomatic code search Switching on Channel set-up Initial set-upOrganizer Manual installation General operation PC mode Adjusting the pictureTV mode Adjusting the sound Broadcast Options MonoPicture in picture PIP Zoom Sleep timerOther functions Customizing your TV setUsing the teletext Subtitles AlarmNewsflash FastextConnecting a videorecorder Connecting other equipmentConnecting a DVD player Connecting a PC Connecting external amplified speakersConnecting an amplifier Using RGB inputSignal frequency information 1920 x 1080i HdtvTroubleshooting Symptom Possible cause RemedyDisplay panel SpecificationsPower source Wall mount installation optional Package contentsStep Wall mount installation optional