Technicolor - Thomson 27LCDB03B important safety instructions Connecting a Computer

Page 23

Connecting a Computer

Method A :

Connect the D-sub signal terminal on the back side of the LCD TV to the output of

PC equipment through min D-sub 15 pin cable.

Connect the stereo sound input jack on the back of the LCD TV to the audio output terminal on the computer.

To display images from the connected computer, select PC using AV button on the remote control

Method B :

Connect the DVI signal terminal on the back side of the LCD TV to the output of PC equipment through min DVI cable.

Connect the stereo sound input jack (Audio input near DVI connector) on the back of the LCD TV to the audio output terminal on the computer.

To display images from the connected computer, select DVI using AV button on the remote control

Note:

1.The display native resolution is 1024 x 768 . If the signal resolution exceeds the native resolution, it may not be possible to show fine detail with sufficient clarity.

2.An adapter is required to use the PC cable (D-sub 15P) to connect a Macintosh computer to the set.

3.Some PC models cannot be connected to the set.

4.There is no need to use an adapter for computers with DOS/V compatible D-sub 15P terminals.

5.Do not set the horizontal and vertical scanning frequencies for PC signals, which are above or below the specified frequency range.

For more information about external device connections, see the manuals of your external devices.

23

Image 23
Contents Important Safety Instructions Page Page Important Information II Safety TipsBefore Setting Up AC Power Supply CordBe sure to disconnect all cables before moving the LCD TV If problems occur during useWhen using the LCD TV IV CautionDifferent territories Supplied AccessoriesIntroduction II Preparation Precaution on battery useBatteries for the Remote Control Getting Started Switching onZzz/LIST Remote control TV functionsColoured buttons LightManual programming Using the remote control for other equipmentProgramming the remote control Automatic code searchInitial set-up Automatic InstallationChannels SET-UP Deleting channels OrganiserOrganiser Arranging channels in orderManual channel set-up Automatic updateManual Installation General operation OperationFreeze ZoomPanning function for Zoom Last programmeBroadcast Options Adjusting the soundSound Return go back to Overview menuPicture Adjusting the picturePhase, Synchronization, V-Position,H-Position TV Lock Setting the PreferencesSleep timer PreferencesNewsflash Accessing TeletextNavigation bar Changing the character set temporarilyFastext Direct access to subpagesSubtitles Other Information PIC Picture in Computer ModeDVI and DVI Audio inputR/Linput Connecting headphonesConnecting a video recorder YPrPb for Video, D-Sub for PC and Audio inputConnecting a Computer TV set Trouble ShootingColors fade Antenna