Installation Instructions
Step 4: 15.5" to 23.5": Install the rear rack brackets as shown in Figure 3 for this mounting depth range (see Step 5 for assembly).
Mounting depth 
bracket
Figure 3. Mounting depth: 15.5" to 23.5".
Step 5: Rear bracket attachment.
Step 5A: Move the slide rails back approximately 10" (25.4 cm). You might need to loosen the thumbscrews to do this.
Step 5B: Attach the rear rack brackets and the cable arm extension as shown in Figure 4, using (4) 8-32 x 3/8" pan-head screws and (4) 8-32 nuts. Place the screws as far apart as possible (see Figure 4).
Step 5C: Tighten all screws.
NOTE: You can attach the cable arm extension to the right or left side, based on your cabling needs.
(1) rear bracket
| (4) |
| (gold) |
(2) | |
|
|
(1) cable management
bracket
(1) rear bracket
(2)
Slide the outer rails back approx. 10".
Figure 4. Attaching the rear bracket.
Page 4 |
| |
|