GAS COOKTOP INSTALLATION INSTRUCTIONS

The supply line should be equipped with an approved shutoff valve. This valve should be located in the same room as the cooktop and should be in a location that allows ease of opening and closing. Do not block access to the shutoff valve. The valve is for turning on or shutting off gas to the appliance.

Grounding Instructions

IMPORTANT Please read carefully.

For personal safety, this appliance must be properly grounded.

The power cord of this appliance is equipped with a 3- prong (grounding) plug which mates with a standard 3- prong grounding wall receptacle (see Figure 7) to minimize the possibility of electric shock hazard from the appliance.

The wall receptacle and circuit should be checked by a qualified electrician to make sure the receptacle is properly grounded.

Figure 6

Once the regulator is in place, open the shutoff valve in the gas supply line. Wait a few minutes for gas to move through the gas line.

Check for leaks. After connecting the cooktop to the gas supply, check the system for leaks with a manometer. If a manometer is not available, turn on the gas supply and use a liquid leak detector (or soap and water) at all joints and connections to check for leaks.

Do not use a flame to check for leaks from gas connections. Checking for leaks with a flame may result in a fire or explosion.

Preferred Method

Grounding type wall receptacle

Do not, under any circumstances, cut, remove,

or bypass the grounding prong.

Power supply cord with 3-prong grounding plug.

Figure 7

Tighten all connections if necessary to prevent gas leakage in the cooktop or supply line.

Check alignment of control knob valves after connecting the cooktop to the gas supply to be sure the cooktop manifold pipe has not moved. A misalignment could cause the valve stems to rub on the control panel, resulting in a gas leak at the valve.

Disconnect this cooktop and its individual shutoff valve from the gas supply piping system during any pressure testing of that system at test pressures greater than 1/2 psig (3.5 kPa or 14" (35.6 cm) water column).

Isolate the cooktop from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than 1/2 psig (3.5 kPa or 14" (35.6 cm) water column).

Electrical Requirements

120 volt, 60 Hertz, properly grounded branch circuit protected by a 15 amp circuit breaker or time delay fuse.

Do not use an extension cord with this cooktop.

Where a standard 2-prong wall receptacle is installed, it is the personal responsibility and obligation of the consumer to have it replaced by a properly grounded 3- prong wall receptacle.

Do not, under any circumstances, cut or remove the third (ground) prong from the power cord.

Disconnect electrical supply cord from wall receptacle before servicing cooktop.

Cooktop Installation

1.Visually inspect the cooktop for damage.

2.If you are installing the optional Stainless Steel backsplash, first fix it at the back of the cooktop using the screws supplied with the kit and follow the instructions attached.

3.Set the cooktop into the countertop cutout.

NOTE: Do not use caulking compound; cooktop should be removable for service when needed.

6

Page 5 Page 7
Page 6
Image 6
Electrolux 318201475 (0710) installation instructions Grounding Instructions, Electrical Requirements, Cooktop Installation
Page 5 Page 7

318201475 (0710) specifications

The Electrolux 318201475 (0710) is a high-performance refrigerator designed to meet the needs of modern households. This refrigerator combines innovative technology with advanced features, making it a valuable asset in any kitchen.

One of the standout features of the Electrolux 318201475 is its spacious interior. With a generous capacity, it offers ample space for groceries, ensuring that families can store everything they need without cramming. The refrigerator is designed with adjustable shelves, allowing users to customize the layout according to their needs, making it easy to store bulky items like party platters or tall containers.

In terms of cooling technology, this model utilizes advanced refrigerator cooling systems, including even temperature distribution. With multi-air flow technology, cold air is evenly distributed throughout the compartments, preventing hot spots and ensuring that all food stays fresh longer. The built-in temperature control system allows users to monitor and adjust the settings effortlessly, ensuring optimal performance tailored to individual preferences.

Energy efficiency is another crucial aspect of the Electrolux 318201475. It boasts an ENERGY STAR rating, which means it meets strict energy efficiency guidelines set by the U.S. Environmental Protection Agency. This not only lowers electricity bills but also contributes to a greener environment, making it a responsible choice for eco-conscious consumers.

The Electrolux 318201475 is equipped with additional convenience features, including a water and ice dispenser located on the exterior of the door. This feature provides easy access to chilled water and ice, eliminating the need for users to open the door frequently, thus maintaining the internal temperature. Moreover, the smart design includes LED lighting, which provides bright illumination throughout the refrigerator, making it easy to find items, while being energy-efficient and long-lasting.

Furthermore, the refrigerator's stainless steel finish not only enhances its aesthetic appeal but also ensures durability and easy cleaning. The fingerprint-resistant surface keeps the appliance looking new, reducing the need for constant maintenance.

In summary, the Electrolux 318201475 (0710) combines style, space, and cutting-edge technology. With its energy efficiency, innovative cooling systems, and user-friendly features, it stands out in the competitive market of home appliances, making it an excellent choice for any modern kitchen.
Top Page Image Contents