Display Installation

MSS6000

Installation Instructions

Site Preparation for Mounting to Surface

WARNING: EXCEEDING WEIGHT CAPACITY CAN RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! It is the installer’s responsibility to make sure the combined weight of all components does not exceed 150 lbs (68.04 kg).

CAUTION: TURNING DISPLAY CAN CAUSE DAMAGE TO SURROUNDING OBJECTS. Make certain location provides enough area for the display to rotate + 45° without being obstructed.

NOTE: See Display Swivel Stop Location Adjustment

section for information on adjusting rotation.

1.Locate a flat dry surface on which to mount the MSS6000 assembly.

2.Measure the hole locations on bottom of MSS6000 and mark the four mounting hole locations on mounting surface. (See Figure 5)

	2	x 4
	3	x 4
	1
		MSS6000
4	x 4	3/4"
4	x 4
		A

Figure 5

3.Drill four 1/4" diameter holes through mounting surface at marks.

4.Secure mount to mounting surface using four 1/4-20 cap screws (not provided) with a length equal to the thickness of the mounting surface A plus 3/4". (See Figure 5)

The following procedure assumes that the proper interface bracket for the display being mounted has already been installed on the display.

If no interface bracket is present on display, install bracket to display using the instructions included with the interface bracket before proceeding.

If an interface bracket for the display being mounted needs to be obtained, or additional assistance is required, contact a Chief Customer Service representative.

NOTE: If the display being mounted has a height of more than 24" the mount needs to be modified prior to display installation. (See Display More Than 24 Inches High section.)

To install the display:

1.While supporting both sides of display, align four mounting buttons on display or interface bracket with four mounting holes in faceplate. (See Figures 6 & 7)

Figure 6

2.Lower display into place listening for audible "click" to ensure recessed area of mounting buttons are properly seated in lower area of mounting holes. (See Figures 6 & 7)

WARNING: IMPROPER INSTALLATION CAN LEAD TO DISPLAY FALLING CAUSING SERIOUS PERSONAL INJURY OR DAMAGE TO EQUIPMENT! Ensure mounting buttons are completely engaged in mounting holes.

NOTE: Holes are provided in the faceplate for use with a padlock or similar locking device, if desired. In addition, the pin and nut may be removed from the upper holes and moved to the lower holes for use as a more permanent locking device. (See Figure 7)

MSS6000 specifications

The Chief Manufacturing MSS6000 is an advanced, high-performance mounting solution designed to meet the dynamic needs of professionals in the audio-visual industry. This robust product is particularly favored in environments such as corporate offices, educational institutions, and entertainment venues, making it essential for seamless presentations and dynamic displays.

One of the main features of the MSS6000 is its versatility. The mount supports a wide range of display sizes, accommodating screens from 40 to 75 inches. This flexibility allows users to adapt the mount to various settings and applications, ensuring an optimal viewing experience. The MSS6000 is designed to support up to 175 pounds, making it suitable for even the heaviest commercial displays.

The mount incorporates innovative technologies that enhance usability and installation. It features an easy-to-use height adjustment system that allows users to modify the display’s height with minimal effort. This is particularly beneficial in situations where different users need to engage with the display at varying heights. Additionally, the MSS6000 includes a built-in cable management system, which helps to maintain a clean and professional look by concealing unsightly cables and wires.

Another key characteristic of the MSS6000 is its robust construction. Crafted from high-grade materials, it ensures durability and longevity, a vital consideration for environments where equipment is subject to frequent use. The mount is also designed with safety in mind, featuring locking mechanisms that secure the display firmly in place, providing peace of mind to users.

The MSS6000 also features a tilt and swivel capability. This allows for a customizable viewing angle, enabling users to position their displays for optimal visibility and engagement. Whether being used for presentations or as part of a digital signage solution, these adjustments contribute significantly to the overall user experience.

Overall, the Chief Manufacturing MSS6000 is a versatile and durable solution for those looking to enhance their AV setups. With its combination of innovative design features, robust construction, and adjustable capabilities, it stands as an excellent choice for anyone in need of a dependable display mounting solution. Whether in a conference room or a classroom, the MSS6000 makes technology integration seamless and effective.