Chief Manufacturing MSS6000 installation instructions Display Swivel Tension Adjustment, Option a

Page 9

Installation Instructions

MSS6000

Display Swivel Tension Adjustment

 

Display swivel tension is pre-set at the factory. Swivel tension

 

will vary depending on the weight of display being mounted.

 

If swivel tension adjustment is required:

 

1.

Disconnect all cords and cables from display.

 

2.

Follow steps in Removing Display from Mount section.

 

3.

Lay mount on back. (See Figure 11)

 

4.

Locate three tension adjustment screws. (See Figure 11)

 

5.

Turn each adjustment screw either clockwise to increase

35°

 

tension, or counter-clockwise to decrease tension.

15°

NOTE: It is important that all adjustment screws are turned

 

 

equal amounts in the same direction for the display to

 

 

turn properly.

 

 

 

25°

 

Tension Adjustment Screw

 

(Turn left to decrease tension

Figure 12

Turn right to increase tension)

 

Cable Management

 

 

The MSS6000 has been designed to provide multiple cable

 

 

management/routing options.

 

 

Option A

 

 

Option A does not use the cable access features of the

 

 

MSS6000 and simply routes the cables away from the display

 

 

and mount. (See Figure )

 

Figure 11

 

6. Install display following the instruction outlined in Display

 

 

Installation section.

 

7.

Test display swivel tension by grasping each side of display

 

 

and turning display left and right.

 

If additional swivel tension adjustment is required, repeat steps

 

1 through 7 above.

 

Display Swivel Stop Location Adjustment

 

The MSS6000 allows for the installation of swivel stops that

Cable

limit the amount of display travel. Stops can be installed at +/-

15°, 25° or 35°.

Access

1.Follow steps 1 through 3 of Display Swivel Tension

Adjustment section.

Figure 13

2.Insert one 10-24 X 1/2” Phillips head cap screw in one of the three swivel stop holes (15°, 25° or 35°) in the base of the stand. (See Figure 12)

9

Image 9
Contents MSS6000 Disclaimer Important Warnings and Cautions DimensionsInstallation Instructions MSS6000 Parts Tools Required for InstallationMount Installation InstallationSite Preparation for Mounting to Surface Display InstallationRemoving Display from Mount Adjustments Display Height AdjustmentDisplay Roll Adjustment Display Swivel Tension Adjustment Display Swivel Stop Location AdjustmentOption a Option C Option BInstallation Instructions MSS6000 +31 040
Related manuals
Manual 10 pages 12.18 Kb

MSS6000 specifications

The Chief Manufacturing MSS6000 is an advanced, high-performance mounting solution designed to meet the dynamic needs of professionals in the audio-visual industry. This robust product is particularly favored in environments such as corporate offices, educational institutions, and entertainment venues, making it essential for seamless presentations and dynamic displays.

One of the main features of the MSS6000 is its versatility. The mount supports a wide range of display sizes, accommodating screens from 40 to 75 inches. This flexibility allows users to adapt the mount to various settings and applications, ensuring an optimal viewing experience. The MSS6000 is designed to support up to 175 pounds, making it suitable for even the heaviest commercial displays.

The mount incorporates innovative technologies that enhance usability and installation. It features an easy-to-use height adjustment system that allows users to modify the display’s height with minimal effort. This is particularly beneficial in situations where different users need to engage with the display at varying heights. Additionally, the MSS6000 includes a built-in cable management system, which helps to maintain a clean and professional look by concealing unsightly cables and wires.

Another key characteristic of the MSS6000 is its robust construction. Crafted from high-grade materials, it ensures durability and longevity, a vital consideration for environments where equipment is subject to frequent use. The mount is also designed with safety in mind, featuring locking mechanisms that secure the display firmly in place, providing peace of mind to users.

The MSS6000 also features a tilt and swivel capability. This allows for a customizable viewing angle, enabling users to position their displays for optimal visibility and engagement. Whether being used for presentations or as part of a digital signage solution, these adjustments contribute significantly to the overall user experience.

Overall, the Chief Manufacturing MSS6000 is a versatile and durable solution for those looking to enhance their AV setups. With its combination of innovative design features, robust construction, and adjustable capabilities, it stands as an excellent choice for anyone in need of a dependable display mounting solution. Whether in a conference room or a classroom, the MSS6000 makes technology integration seamless and effective.