Note: Read entire instruction sheet before you start installation and assembly.
WARNING
•Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, please call Peerless customer care at
•This product should only be installed by someone of good mechanical aptitude, has experience with basic building construction, and fully understands these instructions.
•Make sure that the supporting surface will safely support the combined load of the equipment and all attached hard- ware and components.
•Never exceed the Maximum Load Capacity.
•Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
•Tighten screws firmly, but do not overtighten. Overtightening can damage the items, greatly reducing their holding power.
Table of Contents |
|
Parts List | 3 |
Installing Carriage on Floor Stand | 3 |
Attaching Adapter Plate to Screen with VESA 100 Mounting Pattern | 4 |
Attaching Adapter Plate to Screen with VESA 200 Mounting Pattern | 4 |
Attaching Adapter Plate to Screen with VESA 200 x 200 Mounting Pattern | 5 |
Attaching Adapter Plate to PLP Adapter Bracket | 5 |
Installing Flat Panel Screen on Floor Stand | 6 |
2 of 6 | ISSUED: |