AttachingAdapterPlatetoScreenwithVESA100MountingPattern
WARNING
•If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not tightly secured, damage may occur to screen or product may fail.
2 | Choose hole pattern as shown in figure 2.1. Attach |
adapter plate (B) to back of screen using four M4 x |
10 mm screws (I).
Note: Orientation of "UP" arrow is critical.
Skip to step 3 on page 6.
B
I
fig 2.1
AttachingAdapterPlatetoScreenwithVESA200MountingPattern
WARNING
•If screws don't get three complete turns in the screen inserts or if screws bottom out and adapter plate is still not tightly secured, damage may occur to screen or product may fail.
2 | Choose hole pattern as shown in figure 2.2. Attach |
| ||||||
adapter plate (B) to back of screen using four M4 x |
| |||||||
| 10 mm screws (I) as shown. |
| ||||||
| Note: Orientation of "UP" arrow is critical. |
| ||||||
| *Note: If screw (I) gets less than three threads of |
| ||||||
| engagement, attach adapter plate (B) to back of |
| ||||||
| screen using four M4 x 20 mm screws (J) and four |
| ||||||
| spacers (K) as indicated below. | B | ||||||
| Skip to step 3 on page 6. | |||||||
|
|
|
|
|
|
|
|
|
I
fig 2.2
*For screens with a hole pattern in a pocket, spacers (K) go between adapter plate K (B) and screen.
4 of 6 | ISSUED: |