Niles Audio RCA-TT2 manual Safety First

Page 21

Installation (continued)

As side-by-side wiring is unavoidable in particular spots in every house, just move the sensor cable route away as soon as possible. If construction forces a side by side run for more than ten feet, install metal conduit or shielded sensor cable. Low-voltage cables such as doorbells, intercoms, telephone, speaker, security, or television cannot cause interference on your sensor cables, so you can safely run all of them at the same time, through the same holes, side-by-side.

Safety First!

Wear gloves, safety goggles and head protection when drilling. Avoid nails, they ruin bits and they can cause injury. Pay particular attention when using “hole-hogs” and other powerful electric drills; the torque of the drill when suddenly stopped by a nail can break a strong person’s wrist.

Drilling

Use a bit that is large enough for the cables you plan to run. An auger bit is the preferred bit for rough-in wiring. It will actually pull itself through the wood, so that the drill motor, not you, does most of the work. Always drill the holes in the center of the stud. If you have to notch the stud or drill the hole closer than one inch from the edge of the stud, protect the cable with a nail plate.

When drilling holes in ceiling joists, drill in the center of the joists and try to locate the hole near the end of the joist. DO NOT drill through a “glulam” or any load bearing beam without the direction of your contractor.

Try to line the holes up perfectly, because it makes pulling the cable much easier. A good technique is to snap a chalk line across the face of the studs or against the bottom of the ceiling joists. Then work backward so that you can always see the holes you have already drilled. Paying careful attention to this will save you a lot of time later!

NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-305-238-4373

19

Page 20 Page 22
Image 21
Page 20 Page 22
Contents RCA-TT2 Congratulations Table of ContentsIntroduction CONTENTsComplete System Features and Benefits Remote Control ANYWHERE! KITONE Infrared Sensor ONE Main System UnitHIGH-FIDELITY Wideband Design Features and Benefits IR SensorExtended IR Receiving Range Printed Circuit BoardFeatures and Benefits Main System Unit Features and Benefits Microflasher Installation Considerations Installation Tools RequiredGetting Started Placing the Connection Hub InstallationMSU140 Installation Niles Audio Corporation 1-800-BUY-HIFI Connecting the Sensor Cable to the Connection HubRemovable Connector Plug Connecting the Sensor Cable to the Tabletop SensorInstalling Sensor Connector Connecting the 12VDC Power Supply and EAch MicroFlasherInstallation Mounting a MicroFlasher to A/V Components Make sure that your system tested OK before proceeding Mounting the Connection HubRunning the Sensor Cable Wall-mount placementTypical Mounting Location Mounting LocationNormal Operation Reconnecting the Connection HubAdditional flashers Optional AccessoriesScheduling and Preparation Running Sensor Cable in New ConstructionSafety First Pulling the Cable Concealing Sensor Cable in Existing WallsInstallation Routing Wire Around a Door MSU140 SpecificationsTS120 MF1Limited Warranty Miss Mrs Warranty Registration CardL e s a u d i o C o r p o r a t i o n

RCA-TT2 specifications

The Niles Audio RCA-TT2 is a remarkable addition to the realm of high-fidelity audio systems, blending innovative technology with user-friendly features to enhance sound quality in any environment. Designed for both audiophiles and casual listeners alike, the RCA-TT2 stands out with its robust performance and versatility.

One of the key features of the Niles Audio RCA-TT2 is its dual inputs, allowing for seamless connection with multiple audio sources. This feature is particularly beneficial for users who wish to integrate various devices, such as turntables and media players, into their home audio system. The RCA-TT2 is equipped with a built-in phono preamp, which ensures that vinyl enthusiasts can enjoy their records with optimal clarity and depth without the need for an external component.

The unit employs advanced signal processing technology to deliver exceptional sound quality. With a wide frequency response and low distortion levels, the RCA-TT2 captures the nuances of every track, whether it's a soft acoustic ballad or an explosive rock anthem. The ability to fine-tune the output is further enhanced by its adjustable gain settings, ensuring that users can customize their listening experience to suit their personal preferences.

Designed with aesthetic appeal in mind, the RCA-TT2 features a sleek and contemporary design that seamlessly integrates into any home décor. The durable construction ensures longevity, while the intuitive layout of controls makes operation straightforward, even for those who may not be technically savvy.

Another notable characteristic of the RCA-TT2 is its compatibility with a wide range of speakers and audio systems. Whether users prefer a compact setup or a full-fledged surround sound experience, the RCA-TT2 adapts effortlessly, making it a versatile choice for various audio setups.

Moreover, the Niles Audio RCA-TT2 boasts an impressive signal-to-noise ratio, which minimizes background noise and enhances the overall listening experience. This feature is particularly important for critical listeners who demand pristine audio quality.

In summary, the Niles Audio RCA-TT2 stands as a testament to innovation in audio technology. With its dual inputs, built-in phono preamp, adjustable gain settings, and aesthetic design, it caters to a diverse range of audio enthusiasts. Whether you are a vinyl collector or simply seeking to upgrade your audio experience, the RCA-TT2 delivers a powerful and engaging sound that transforms your listening sessions into a truly immersive event.
Top Page Image Contents