INSTALLATION (continued)
Step 9 – Reconnecting the Connection Hub
Reconnect the sensor plug, flashers and power supply as outlined in steps 2, 3 and 4 (Figure 11). That’s it! Now you are ready to control your audio/video equipment from the room you chose.
Note: Make sure that the stripped ends of the wire do not come in contact with one another or any surface other than the connector.
Normal Operation
To control your audio/video components, simply aim your remote control at the tabletop sensor. If you are within range (and your remote control’s batteries are fresh), the LED on the sensor will flash a bright blue color each time you press a button on the remote (Figure 13). If you are using a remote control with macro capabilities (a single press of a button issues a string of commands), allow sufficient time for all of the commands to execute.
Figure 13: System Operation
16