INSTALLATION (continued)
MSU140 Base |
Rubber Feet |
Figure 10A: | Figure 10B: Tabletop placement |
Use sheetrock screws | Affix the enclosed |
| rubber feet to the base of the MSU140 |
Step 7 – Running the Sensor Cable
Conceal the sensor cable between the tabletop sensor and the connection hub. For specific information refer to “Running Sensor Cable in New
Construction” or “Concealing Sensor Cable in Existing Walls.” If you need to cut and restrip the wire, make sure that only 1/4” of wire is exposed. Exposing too much wire could create “shorts” within the system.
Important: If you have doubts about whether you are capable of installing a Niles
14