Niles Audio TS120 manual Operation, Green Power Status LED, Blue Feedback LED

Page 11

Operation

Operation of the TS120 is simple. Stand within the operational range of your TS120, aim your hand-held remote at the TS120 and press the button for the desired command. Your IR command is instantly repeated to your A/V equipment.

Green “Power Status” LED

When the TS120 is correctly connected (Figure 2), the Green LED will stay lit as long as the pre- amp/receiver is on. When your preamp/receiver is off, the LED will stay off.

Blue “Feedback” LED

The blue “feedback” LED on the TS120 visually confirms the reception of an IR command.

NILES AUDIO CORPORATION – 1-800-BUY-HIFI1-305-238-4373

9

Image 11
Contents TS120 Congratulations Table of ContentsIntroduction CONTentsFeatures and Benefits TS120 Mounting Location Installation ConsiderationsType of Cable Avoiding Optical Feedback Installation ConsiderationsReceiving Range and Pickup Angle Avoiding Electrical InterferenceAvoiding Interference Using the Power Status DisplayParts guide Step by Step InstallationInstalling the removable connector Blue Feedback LED Green Power Status LEDOperation Troubleshooting Identifying the Type of Interference TroubleshootingEliminating Optical feedback EMI Electromagnetic Interference IR Test LED OffIR Test LED On or Flickering Specifications Page Niles Audio Corporation 1-800-BUY-HIFI Limited Warranty Miss Mrs Warranty Registration CardL e s a u d i o C o r p o r a t i o n