R E M O T E C O N T R O L A N Y W H E R E ! K I T
Step 2 – Connecting the Sensor Cable to the
Connection Hub
For your convenience, the sensor cable ends have been stripped.
Insert each wire into the appropriate hole on the removable connector plug (Figure 2), and snap the locking tab down. To help you, the connector plug is keyed. Insert the smooth side of the connector plug into the smooth side of the socket. Don’t force the scalloped side of the connector plug into the smooth side of the socket.
Make sure that the orientation of the connector matches the sensor (Figure 3).
To Niles
IR Flasher
To unswitched
AC Outlet
AC/DC |
STATUS |
IN |
To 12VDC Power Supply
Plugged into a switched AC Outlet. Typically found in back of a receiver.
Figure 2:
MSU250 Installation
| MSU250 |
| MS200 Sensor |
| MSU250 Sensor |
5 | Connection |
|