R E M O T E C O N T R O L A N Y W H E R E ! K I T
Repeat this procedure for each A/V component you wish to control.
When the A/V component responds repeatedly, peel off the protective backing on the MicroFlasher and place the MicroFlasher in that location.
If you get no response at all, call Niles Technical Support at
Step 5 – Mounting the Connection Hub Make sure that your system tested OK before proceeding
Figure 7: Locating IR Sensor | Once you have decided on the ideal location for |
| the connection hub, unplug the 12VDC power |
supply from the electrical outlet and disconnect the sensor and the MicroFlasher cables from the connection hub (Figure 8).
The connection hub can be either mounted on a wall using screws or placed on a shelf using the included adhesive feet (Figure 9).
9