Niles Audio IR-KIT manual Specifications IR-E1, IR transmitting

Page 14

SPECIFICATIONS (CONTINUED)

IR-E1

IR system:

Works with practically all brands of IR remote controls

IR transmitting:

4' (line of sight)

Emitters mount directly to the IR window of a component

Wiring requirements:

10' of 2-conductor 24-gauge wire with a 3.5mm plug is supplied

Use 18-gauge for distances up to 20' and 16-gauge for up to 200'

Mounting:

Self-adhesive, surface mount

Dimensions:

5/16" wide x 3/16" high x 1/2" deep IR Blocking Cover Dimensions 2" wide x 2" high x 1/4" deep Warranty: 2 year limited

12

Image 14

Contents IR-KIT Table of Contents IR-KITIR-E1 Infrared Emitter Features IR-CB2Installation friendly design Product Overview IR-E1Page Package Contents Preparing for InstallationInstallation See installation diagramInstallation Diagram Commands Power StatusHi/Low Emitter Output Switches Volt Trigger OutputOperation Additional IR ReceiversSolution Systematically troubleshoot the wiring by TroubleshootingBad Connections or Wiring SolutionOptical or Electromagnetic Interference Solution To eliminate EMI try the following methodsSolution Replace IR-E1HO Emitters Optical Feedback LoopSpecifications IR-CB2 IR-SMRSpecifications IR-E1 IR transmittingLimited Warranty Page Page Page