PACKAGE CONTENTS
■IR-CB2 x 1
■Snap and Lock Connectors x 2
■In-line power supply x 1
■Self-adhesive rubber feet x 4
■IR-SMR Receiver x 1
■Adhesive-backed strip for mounting x 1
■IR-E1 Emitters x 5
■IR Blocking Covers x 5
■Extra emitter adhesive strips x 10
PREPARING FOR INSTALLATION
The IR Receiver cables, emitter cables and the 12V DC power supply cable must all reach the proposed location of the IR-CB2 Connecting Block. Mark the cables with wire labels, describing where the cables originate from, rather than where they will terminate. Locate a local un-switched AC outlet to be used to power the IR-CB2 power supply.
Tools Required
■1/8" Slotted screwdriver
■Wire labels
■Wire stripper
