Creating a program
—CD Program Memory (CD changer with program memory function)
You can play the tracks in the order you want by making your own program. You can make two programs: Program 1 and Program 2. You can select up to 12 tracks in each program. You can store the programs in memory.
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
Program edit mode
CD2 DISC | TRACK |
EQ2 | 3 P101 |
PLAY MODE | ENTER |
“P 1” shows Program 1 is selected.
| If you have labeled the disc, the bank edit |
| mode appears. Press (3) (PLAY MODE) to |
| display “P 1” above. |
|
|
EN | To select Program 2, press (4) (n) |
| repeatedly until “P 2” appears. |
2 Select the track you want.
1Press (SOURCE) repeatedly to select the changer.
2Press (SHIFT), then press the number button to select the disc.
3Press (SHIFT).
4Press either side of (SEEK/AMS) to select the track.
3 Press (5) (ENTER) momentarily.
P1
ENTER 
PLAY MODE | ENTER |
| µ |
CD2 DISC | TRACK |
32 P102
PLAY MODE | ENTER |
4 To continue entering tracks, repeat steps
2 and 3.
5 When you finish entering tracks, press
(3)(PLAY MODE) for two seconds.
16
Notes
•“*WAIT*” appears in the display while the unit is reading the data, or when a disc has not been put into the unit.
•“*FULL*” appears in the display when you try to enter more than 12 tracks into a program at one time.
Playing the stored program
Changing the disc order in the changer will not affect program memory play.
You can select:
•PGM 1 to play Program 1. •PGM 2 to play Program 2.
•PGM 1+2 to play Programs 1 and 2.
1 Press (SHIFT).
2 Press (3) (PLAY MODE) repeatedly until “PGM” appears.
3 Press (4) (n) repeatedly until the desired progarm appears.
| z |
| z |
| z |
|
|
|
|
| |||
|
|
|
|
| ||
|
|
|
|
| ||
To go back to the normal playback mode, select
Notes
•If you press the number button during program memory play, program memory play is interrupted, and playback of the selected disc starts.
•“NO DATA” appears in the display if no track is stored in the program.
•If a track stored into the program memory is not in the disc magazine, the track will be skipped.
•When the disc magazine contains not a single track stored into the program memory, or when the program information has not been loaded yet, “NO READY” appears.
Erasing the entire program
1 Press (SHIFT), then press (3) (PLAY
MODE) for two seconds.
CD2 DISC | TRACK |
47 P108
PLAY MODE | ENTER |
“P 1” shows Program 1 is selected.
If you have labeled the disc, the bank edit mode appears. Press (3) (PLAY MODE) to display “P 1” above.
Actual total number: | Sony |
|
|