Displaying the station name
Press (DSPL) during radio reception.
FM1
3 WRKISS
Each time you press (DSPL), the item changes as follows:
z Station name* zFrequency z Clock 
*If the station name of a station is not stored, “NO NAME” appears in the display for one second.
Erasing the station name
1 Tune in any station and press (LIST) for two seconds.
2 Press (DSPL) for two seconds.
3 Press (+) or (Ð) to select the name that you want to erase.
EN
4 Press (5) (ENTER) for two seconds. The name is erased.
Repeat steps 3 and 4 if you want to erase other names.
5 Press (LIST) for two seconds.
The unit returns to the normal radio reception mode.
Locating a station by
name — List-up
1 Press (LIST) momentarily.
The name assigned to the station currently playing appears in the display.
LST
3 WRKISS
ENTER
2 Press (LIST) repeatedly until you find the desired station.
3 Press (5) (ENTER) to tune in the desired station.
Note
Once the station name or frequency has been displayed for five seconds, the display goes back to its normal mode. To turn off the display, press (DSPL).
10
Other Functions
Using the rotary remote
The rotary remote works by pressing buttons and/or rotating controls.
You can control the optional CD or MD changer with the rotary remote.
By pressing the button (the SOURCE button)
(SOURCE)
Every time you press (SOURCE), the source changes as follows:
FM1 nFM2 nAM nCD1 nCD2 nMD1 n MD2 nTV* nAUX* (video)
*When the optional TV tuner is connected.
Tip
When the POWER SELECT switch is set to position B, you can turn on this unit by pressing (SOURCE) on the rotary remote.
By rotating the control (the SEEK/ AMS control)
Rotate the control momentarily and release it to:
•Locate a specific track on a disc. Rotate and hold the control to locate the specific point in a track, then release it to start playback.
•Tune in the stations automatically. Rotate and hold the control to tune in the specific station.
Actual total number: | Sony |
|
|