Connect Hydraulic Hoses

STORAGE

NOTICE

■Failure to connect hoses together will result in damage to tractor hydraulic system.

Tractor & Woods Loader: Connect male quick cou- pler on end of hose from loader control valve to female quick coupler in rear hydraulic valve when backhoe is removed from tractor. See Figure 18. Make sure 3-point lift arms do not interfere with hose. Adjust hose as necessary to prevent interference.

Tractor & New Holland Loader: Connect male quick coupler on end of hose from loader control valve to female quick coupler in the hydraulic hard line below the tractor seat when backhoe is removed from trac- tor. See Figure 19

BACKHOE: Connect IN and OUT quick couplers together to prevent dirt and debris from accumulating in quick couplers. See Figure 20.

DP10

Figure 18. Hose Connection - Backhoe Removed

Woods Loader

Loader PBY

Hose

DP9

Figure 19. Hose Connection - Backhoe Removed

New Holland Loader

Figure 20. Backhoe Hose Connection

Attach 3-Point Arms

Lower 3-point lift arms and anti-sway links can be used on tractor when backhoe is removed.

Attach 3-point lift arms anti-sway links using the nor- mal tractor connection.

Secure anti-sway links to tractor using sway link pins and safety pins (22) provided in kit.

22.15036 Safety pin, 3/16

14 Installation	MAN0715 (rev. 10/31/2008)

STORAGE