Woods Equipment 1012606 manual Attach Top Link to Backhoe, Top Link Installation

Attach Top Link to Backhoe

1. Attach top link (1) to the main frame using two	1. 1017875		Top link
cap screws (7), four hardened flat washers (16),	2.	37670	Double top link
and two hex nuts (8).	7.	14334	3/4 NC x 3 HHCS GR5
2. Slide double top link (2) over top link (1) and	8.	1450	3/4 NC Hex nut
secure using two cap screws (10) and lock huts	10.	34157	7/8 NC x 3-1/2 HHCS GR5
(12). See Figure 3.
	12.	34194	7/8 NC Lock nut
NOTE: To estimate the overall length of the two	16.	57798	3/4 Hardened flat washer
top link bars; roughly measure from the center of
the tractor top link bracket to the center of the
lower 3-point lift arm pivot as shown in Figure 3.
Final adjustment will be made when backhoe is
attached to tractor.

Figure 3. Top Link Installation

6 Installation MAN0549 (6/30/2006)