Woods Equipment 1012606 manual Installation

Attach Backhoe to Tractor (Continued)

5.Place tractor 3-point lower lift arms between right and left mounting brackets on the backhoe. Secure into position using hitch pins (14), sleeves

(13)if needed, and klik pin (17).

6.Connect double top link bar to the tractor top link bracket. Use top link pin supplied with your tractor and sleeve (9). If necessary, separate and adjust top link bars IN or OUT to maintain the backhoe vertical position. See “Tractor Connections” on page 11 for tractor top link specifications.

NOTE: Sleeve (9) is for tractors with a 1-inch top link pin.

7.Torque all hardware to specifications listed in the

Figure 6. Tractor 3-Point Arm Installed

9.30067 Sleeve, .765 x 1.0 x 1.69

13.34291 Sleeve, 5/32 x 1-7/16 x 1-7/8

14.37487 Pin, hitch .88 x 3.0

17.62043 Klik pin, 1/4 x 1-3/4

8 Installation MAN0549 (6/30/2006)